Short answer: the price of a steel diesel storage tank in the UAE depends mainly on how much steel it uses (capacity, plate thickness, single or double wall), the standard it is built to, and the accessories and coating it needs. Two 50,000-litre tanks can differ in price by a factor of two, so the only reliable number is a quotation based on your specification. This guide shows what drives the cost and how to get an accurate quote quickly.
1. Steel weight: the biggest cost driver
Most of the cost of a fabricated tank is the steel plate plus the welding and labour that goes with it, so weight is the best first estimate. Weight depends on capacity, shape and plate thickness.
Worked example: 50,000-litre horizontal tank. A cylindrical tank 2.5 m in diameter needs to be about 10.2 m long to hold 50 m³. Its shell and two ends add up to roughly 90 m² of plate. In 6 mm carbon steel (about 47 kg per m²) that is around 4.2 tonnes of plate, before saddles, manholes, nozzles and stiffeners, which typically take the total to roughly 4.5 to 5 tonnes. Thicker plate, or a second wall, raises the weight in proportion.
2. Single wall or double wall
A double-wall tank has an outer shell around the inner tank, so a leak is contained without a separate concrete bund. It uses close to twice the steel of a single-wall tank and adds a leak-detection point, so it costs noticeably more, but it can save the cost and space of a bund wall. Which one you need is usually decided by the site layout and the Civil Defence approval.
3. Horizontal or vertical
- Horizontal tanks sit on saddles, are easy to transport and suit capacities up to about 100,000 litres.
- Vertical tanks use less ground area and suit larger capacities; above a certain size they are built on site on a foundation.
4. Design standard
A tank built to a named standard such as UL 142 or API 650, with full material certificates, welding procedures and testing records, costs more than a general workshop tank, but it is often required by consultants, oil companies and approval authorities. See our guide API 650 vs API 620 vs UL 142 to understand which applies.
5. Accessories and fittings
- Manholes, inlet and outlet nozzles, vents and flame arrestors
- Level gauge or electronic level sensor, overfill alarm
- Ladder, platform and handrails
- Pump set, filters and fuel-dispensing equipment
- Leak-detection port (double-wall tanks)
6. Surface preparation and painting
In the UAE climate, proper sandblasting and an epoxy or polyurethane paint system protect the tank from corrosion. A higher-specification coating, or internal lining, adds cost but extends service life. Rukn Al Mizan does sandblasting and painting in-house.
7. Testing, delivery and installation
Hydrostatic or air testing, NDT on welds, transport by trailer (and crane for unloading), and installation on site all add to the final price. Delivery distance matters: a tank delivered within Sharjah costs less to move than one going to Abu Dhabi, Oman or Saudi Arabia.
How to get an accurate quote
Send the fabricator these details and you will get a firm price much faster:
- Capacity in litres and whether you prefer horizontal or vertical
- Single wall or double wall
- Design standard required, if any (UL 142, API 650 or other)
- Accessories needed (level gauge, pump, ladder, dispenser)
- Coating required, inside and outside
- Delivery location and whether installation is included
Frequently asked questions
What is the most important factor in diesel tank price?
The amount of steel, which depends on capacity, plate thickness and whether the tank is single or double wall. Accessories, coating and the design standard come next.
How much steel does a 50,000-litre diesel tank need?
A single-wall horizontal tank 2.5 m in diameter in 6 mm plate uses about 4.2 tonnes of plate for the shell and ends, and roughly 4.5 to 5 tonnes with saddles and fittings. A double-wall tank needs close to twice that.
Is a double-wall diesel tank worth the extra cost?
Often yes, if it removes the need for a concrete bund or is required for approval. Compare the cost of a bund wall and the space it takes with the extra steel of a double-wall tank.
How long does it take to fabricate a diesel tank?
It depends on size, specification and workshop load. Ask for the delivery time together with the quotation, and confirm whether approval drawings are needed first.
Get a diesel tank quotation
Rukn Al Mizan designs and fabricates diesel and oil storage tanks, single and double wall, from its workshop in Sajja Industrial Area, Sharjah, for clients across the UAE and GCC. Send your capacity and requirements through our contact page, WhatsApp or call +971 50 430 2562, and see our storage tank fabrication service.
